This is the mount only (not a digital file).
Designed to mount a common 50×50×3mm copper CPU water block with G1/4″ threads onto a GTX 1060 for water cooling / bench experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4″ (fittings usually not included with the block)
• Please see picture of block
What you get (included):
• 1× printed GTX 1060 waterblock mount
• All nuts, bolts, and washers required for the install
What you still need:
• The 50×50×3mm G1/4″ copper water block
• G1/4″ fittings
• Tubing (and the rest of your loop)
Important:
GTX 1070 PCBs can vary by brand/model. Please match your card’s mounting hole layout to the product photos before ordering. If you’re unsure, message me with a photo of your PCB around the core and I’ll tell you if it’ll fit
Tested on Asus Strix 1070
Shipping from Australia costs more than plastic.
It’s flat rate per order — add more mounts to make it make sense.
This is the mount only (not a digital file).
Designed to mount a common 50×50×3mm copper CPU water block with G1/4″ threads onto a GTX 1060 for water cooling / bench experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4″ (fittings usually not included with the block)
• Please see picture of block
What you get (included):
• 1× printed GTX 1060 waterblock mount
• All nuts, bolts, and washers required for the install
What you still need:
• The 50×50×3mm G1/4″ copper water block
• G1/4″ fittings
• Tubing (and the rest of your loop)
Important:
GTX 1070 PCBs can vary by brand/model. Please match your card’s mounting hole layout to the product photos before ordering. If you’re unsure, message me with a photo of your PCB around the core and I’ll tell you if it’ll fit
Tested on Asus Strix 1070
Shipping from Australia costs more than plastic.
It’s flat rate per order — add more mounts to make it make sense.
