DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Gigabyte models but should work for all.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Gigabyte models but should work for all.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
