STL FILES
Printable GPU cooling mods and other 3D printable TrashBench designs.
RTX 50 SERIES
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Gigabyte models but should work for all.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print a mount that bolts a Thermalright-style CPU tower cooler onto an RX 6600. It's designed around the Thermalright mounting style that uses a metal plate with a single center nut/screw, and a cooler base with the machined channel (the same style used on the Peerless Assassin).
Compatible cooler style (must match):
Thermalright tower coolers using the center-nut mounting plate (Peerless Assassin style)
Base with the central channel / groove (as shown in the listing photos)
What you get:
STL file(s) for the RX 6600 CPU Tower Mount
You will still need:
A compatible Thermalright CPU tower cooler
Hardware (nuts/bolts/washers) to assemble it
Thermal paste + tools
A 3D printer and a willingness to void warranties emotionally
Print notes:
Recommended materials: PETG / ABS / Nylon (PLA is okay for test fitting but can soften with heat).
Print and test-fit before running the card.
Important:
RX 6600 PCBs vary by brand and model. This STL is only guaranteed for the Gigabyte RX 6600 Eagle used during development. Check your mounting hole spacing before printing. If your card doesn't match, the mount won't fit.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Asus and EVGA models.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
RTX 40 SERIES
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print an AIO mounting bracket for the ASUS RTX 4060 ProArt, designed specifically to mount the MSI CoreLiquid A13 cooler.
This is not a universal AIO mount.
What you get:
STL file(s) for the RTX 4060 ASUS ProArt MSI CoreLiquid A13 Mount
60 mm fan bracket
90 mm fan bracket
You will still need:
MSI CoreLiquid A13 AIO cooler
60 mm and 90 mm fan
Your own nuts, bolts and mounting hardware
Thermal paste + tools
A 3D printer and a willingness to void warranties emotionally
Threaded heat set inserts
Print notes:
Recommended materials: PETG / ABS / Nylon (PLA is okay for test fitting but can soften with heat).
Print and test-fit before running the card.
Important:
This mount is only guaranteed to fit the ASUS RTX 4060 ProArt with the MSI CoreLiquid A13 cooler.
Compatibility with any other GPU or cooler is not guaranteed.
Measure twice, print once.
RTX 30 SERIES
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print a mount that bolts a Thermalright-style CPU tower cooler onto an RTX 3050. It’s designed around the Thermalright mounting style that uses a metal plate with a single center nut/screw, and a cooler base with the machined channel (the same style used on the Peerless Assassin).
Compatible cooler style (must match):
Thermalright tower coolers using the center-nut mounting plate (Peerless Assassin style)
Base with the central channel / groove (as shown in the listing photos)
What you get:
STL file(s) for the RTX 3050 CPU-cooler mount
You will still need:
A compatible Thermalright CPU tower cooler
Hardware (nuts/bolts/washers) to assemble it
Thermal paste + tools
A 3D printer and a willingness to void warranties emotionally
Print notes:
Recommended materials: PETG / ABS / Nylon (PLA is okay for test fitting but can soften with heat).
Print and test-fit before running the card.
Important:
RTX 3050 PCBs vary by brand/model. This STL is only guaranteed for the Gigabyte cards. Measure your mounting holes, if they are circa 54mm, you’re golden. If your mounting holes don’t match, it won’t fit.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print a mount that bolts a Thermalright-style CPU tower cooler onto an RTX 3060. It’s designed around the Thermalright mounting style that uses a metal plate with a single center nut/screw, and a cooler base with the machined channel (the same style used on the Peerless Assassin).
Compatible cooler style (must match):
Thermalright tower coolers using the center-nut mounting plate (Peerless Assassin style)
Base with the central channel / groove (as shown in the listing photos)
What you get:
STL file(s) for the RTX 3060 CPU-cooler mount
You will still need:
A compatible Thermalright CPU tower cooler
Hardware (nuts/bolts/washers) to assemble it
Thermal paste + tools
A 3D printer and a willingness to void warranties emotionally
Print notes:
Recommended materials: PETG / ABS / Nylon (PLA is okay for test fitting but can soften with heat).
Print and test-fit before running the card.
Important:
RTX 3060 PCBs vary by brand/model. This STL is only guaranteed for the Gigabyte cards. Measure your mounting holes, if they are circa 54mm, you’re golden. If your mounting holes don’t match, it won’t fit.
RTX 20 SERIES
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print a mount that bolts a Thermalright-style CPU tower cooler onto an RTX 2060. It’s designed around the Thermalright mounting style that uses a metal plate with a single center nut/screw, and a cooler base with the machined channel (the same style used on the Peerless Assassin).
Compatible cooler style (must match):
Thermalright tower coolers using the center-nut mounting plate (Peerless Assassin style)
Base with the central channel / groove (as shown in the listing photos)
What you get:
STL file(s) for the RTX 2060 CPU-cooler mount
You will still need:
A compatible Thermalright CPU tower cooler
Hardware (nuts/bolts/washers) to assemble it
Thermal paste + tools
A 3D printer and a willingness to void warranties emotionally
Print notes:
Recommended materials: PETG / ABS / Nylon (PLA is okay for test fitting but can soften with heat).
Print and test-fit before running the card.
Important:
RTX 2060 PCBs vary by brand/model. This STL is only guaranteed for the PCB layout shown in the product photos / listing. If your mounting holes don’t match, it won’t fit.
gtx 10 SERIES
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
Designed to mount a “South Bridge” style PC water block (pictured) onto an GTX 1050 for liquid cooling / bench experiments.
Compatible block spec (must match):
• G1/4 female threaded ports
• Mounting pitch: 44–58mm diagonal (as listed on the block)
• “South Bridge” style block shape (see product photos)
What you get (included):
• 1× STL File GTX 1050 waterblock mount
What you still need:
• The water block (pictured) that matches the specs above
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Gigabyte models
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print an AIO mounting bracket for the Gigabyte RTX 3070 Aorus Master, designed specifically to mount the MSI CoreLiquid A13 cooler.
This is not a universal AIO mount.
What you get:
STL file(s) for the RTX 3070 Aorus Master MSI CoreLiquid A13 Mount
60 mm fan bracket
90 mm fan bracket
You will still need:
MSI CoreLiquid A13 AIO cooler
60 mm and 90 mm fan
Your own nuts, bolts and mounting hardware
Thermal paste + tools
A 3D printer and a willingness to void warranties emotionally
Threaded heat set inserts
Important:
Only guaranteed to fit the Gigabyte RTX 3070 Aorus Master with the MSI CoreLiquid A13 cooler.
Compatibility with any other GPU or cooler is not guaranteed.
Measure twice, print once.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Asus and EVGA models.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
rx 6000 series
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Asus and EVGA models.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print an AIO mounting bracket for the ASUS RTX 3080 Strix, designed specifically to mount the MSI CoreLiquid A13 cooler.
This is not a universal AIO mount.
What you get:
STL file(s) for the RTX 3080 ASUS Strix MSI CoreLiquid A13 Mount
60 mm fan bracket
90 mm fan bracket
You will still need:
MSI CoreLiquid A13 AIO cooler
60 mm and 90 mm fan
Your own nuts, bolts and mounting hardware
Thermal paste + tools
A 3D printer and a willingness to void warranties emotionally
Threaded heat set inserts
Print notes:
Recommended materials: PETG / ABS / Nylon(PLA is okay for test fitting but can soften with heat).
Print and test-fit before running the card.
Important:
This mount is only guaranteed to fit the ASUS RTX 3080 Strix with the MSI CoreLiquid A13 cooler.
Compatibility with any other GPU or cooler is not guaranteed.
Measure twice, print once.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Asus and EVGA models.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files let you 3D print an AIO mounting bracket for the Gigabyte RTX 3060 Gaming OC, designed specifically to mount the MSI CoreLiquid A13 cooler.
This is not a universal AIO mount.
What you get:
STL file(s) for the RTX 3060 Gigabyte Gaming OC MSI CoreLiquid A13 Mount
60 mm fan bracket
90 mm fan bracket
You will still need:
MSI CoreLiquid A13 AIO cooler
60 mm or 90 mm fan
Your own nuts, bolts and mounting hardware
Thermal paste + tools
Threaded heat set inserts
A 3D printer and a willingness to void warranties emotionally
Print notes:
Recommended materials: PETG / ABS / Nylon (PLA is okay for test fitting but can soften with heat).
Print and test-fit before running the card.
Important:
This mount is only guaranteed to fit the Gigabyte RTX 3060 Gaming OC with the MSI CoreLiquid A13 cooler.
Compatibility with any other GPU or cooler is not guaranteed.
Measure twice, print once.