Ditch the zip ties.
The TrashBench Universal GPU Deshroud Fan Clip Kit lets you mount standard PC fans directly to your GPU heatsink after removing the factory fan shroud.
Whether you're replacing dead or noisy GPU fans, chasing better cooling, or just want to strap much bigger fans to your graphics card, these clips give you a clean, reusable way to do it.
Each kit includes a selection of slip-in and bolt-on clips, allowing different mounting methods to be mixed and matched depending on your GPU heatsink and which fan mounting holes are accessible.
Choose your kit:
2-Fan Kit — hardware for mounting up to 2 fans
3-Fan Kit — hardware for mounting up to 3 fans
Both kits are available in 1.3 mm or 1.5 mm clip sizes.
There's no need to get the calipers out. Grab two standard credit cards and gently try to slide them together into the heatsink fins where you intend to mount the clips.
Two cards fit → choose 1.5 mm
Two cards don't fit → choose 1.3 mm
If you're unsure, choose 1.5 mm.
Your kit includes:
Slip-in clips
Bolt-on clips
Fan mounting hardware
Enough clips and hardware for your selected 2-fan or 3-fan kit
Illustrated installation instructions
Designed for standard 120 mm PC fans with conventional corner mounting holes.
GPU heatsinks vary significantly between models, so fit will vary. Clips may require some force to insert and may feel somewhat loose or very snug depending on the heatsink. Different clip types can be used at different mounting points to get the best fit.
Please check the credit-card sizing guide before ordering.
Installation Instructions
Ditch the zip ties.
The TrashBench Universal GPU Deshroud Fan Clip Kit lets you mount standard PC fans directly to your GPU heatsink after removing the factory fan shroud.
Whether you're replacing dead or noisy GPU fans, chasing better cooling, or just want to strap much bigger fans to your graphics card, these clips give you a clean, reusable way to do it.
Each kit includes a selection of slip-in and bolt-on clips, allowing different mounting methods to be mixed and matched depending on your GPU heatsink and which fan mounting holes are accessible.
Choose your kit:
2-Fan Kit — hardware for mounting up to 2 fans
3-Fan Kit — hardware for mounting up to 3 fans
Both kits are available in 1.3 mm or 1.5 mm clip sizes.
There's no need to get the calipers out. Grab two standard credit cards and gently try to slide them together into the heatsink fins where you intend to mount the clips.
Two cards fit → choose 1.5 mm
Two cards don't fit → choose 1.3 mm
If you're unsure, choose 1.5 mm.
Your kit includes:
Slip-in clips
Bolt-on clips
Fan mounting hardware
Enough clips and hardware for your selected 2-fan or 3-fan kit
Illustrated installation instructions
Designed for standard 120 mm PC fans with conventional corner mounting holes.
GPU heatsinks vary significantly between models, so fit will vary. Clips may require some force to insert and may feel somewhat loose or very snug depending on the heatsink. Different clip types can be used at different mounting points to get the best fit.
Please check the credit-card sizing guide before ordering.
Installation Instructions
