TRAShBENCH
Garage experiments.
Real results.
The mounts that make it possible.
available hardware
Printed mounts + STLs for DIY GPU Cooling satisfaction.
DIGITAL DOWNLOAD — STL FILES ONLY.
No physical item shipped.
These STL files are for a 3D-printed mount that lets you attach a common 50×50mm copper CPU water block to your GPU for liquid cooling experiments.
Compatible block spec (must match):
• Copper base: 50×50×3mm
• Ports: G1/4 (fittings not included with most blocks)
You will need:
• The 50×50mm G1/4 copper water block
• G1/4 fittings
• Tubing + your loop hardware
• Nuts/bolts/washers (hardware not included with digital files)
Notes:
• GPU PCBs vary by brand/model. This STL is only guaranteed for the Asus and EVGA models.
• Print a test fit first. If your mounting holes don’t match the photos, it won’t fit.
TRASHBENCH MERCH
Make PC Hardware Fun Again
Fed up with the state of the PC industry, I decided to do something about it. Who said you need deep pockets to play with PC hardware? TrashBench is about pushing old and cheap gear to the limit with nothing but cable ties, plastic mounts… and maybe a freezer. Have fun.
